Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Fuel Pump Replacement for BMW 3 Series

Model: BMW Serie 3 E46 - Years: 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006
Part: Fuel pump

See other generations:
Video tutorial

In this guide, find the main instructions for removing and replacing the fuel pump on the BMW 3 Series. First, open the rear doors and start by removing the rear seat.

Next, unscrew the screws on the cover to access the fuel pump, disconnecting the electrical connector and the fuel lines as shown in the video. At this point, remove the submerged pump from the tank, replacing it if necessary with a new original one. Make the various connections and then reinstall the rear seat!


Updated on 24 August 2026 by ScegliAuto


Related tutorials

Guide to replacing the fuel pump of the BMW 3 Series 325i
Guide to replacing the fuel pump of the BMW 3 Series 325i
BMW Serie 3 (1998-2006 / E46) These brief and simple instructions will show us the main steps on how to disassemble and replace the fuel pump of the BMW 3 Series 325i. First, we o…
Removing Fuel Pump BMW 3 Series
Removing Fuel Pump BMW 3 Series
BMW Serie 3 (1998-2006 / E46) Today, in this video tutorial, you will learn how to remove the fuel pump from a BMW 3 Series. First, open the trunk and remove the covering on the r…
How to Replace the Fuel Pump on a BMW 3 Series?
How to Replace the Fuel Pump on a BMW 3 Series?
BMW Serie 3 (2005-2013 / E92, E90, E91) To replace the fuel pump on a BMW 3 Series, remove the rear seat cushions by disengaging their retaining clips. Once the seats are removed, loosen th…

Other guides you may be interested in

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos