Do it yourself
| ||||
|
BMW Serie 3 - Video tutorial
Model: BMW Serie 3
E46
- Years 1998-2006 Today, in this video tutorial, we will see how to disassemble the fuel pump of a BMW 3 Series. First we open the boot lid and remove the lining that we find on the right side: then we remove the plastic cover and access our pump fuel. At this point we go to raise the rear bench and we go to disconnect the electrical connector of the pump and the fuel pipe; now we are going to unscrew the ring nut of the fuel pump so that it can be pulled upwards and extracted, as shown in the video. Then replace it with the new one!
Posted on 26 December 2023 by ScegliAuto
Other guides that may interest you
|
Frequently Asked QuestionsHow do you adjust the clutch cable on the Kia Picanto?To be able to adjust the clutch cable of the Kia Picanto you need to open the hood so that you have access to the components inside the engine compartment: in order to reach the cable you will need to remove some components on the right side, such as the battery and the air filter. Below them you will find the clutch cable, which will have to be adjusted by screwing or loosening the bolt placed at the end of the cable. This will make the pedal harder or softer; after the adjustment, it will be possible to assemble all the components by closing the hood. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.010
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |