Do it yourself
Frequently asked questions about cars and motorcycles

Guide to Replacing the Fuel Pump on the BMW 3 Series 325i

Model: BMW Serie 3 E46 - Years: 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006
Part: Fuel pump

See other generations:
Video tutorial

These brief and simple instructions will show you the main steps to disassemble and replace the fuel pump on the BMW 3 Series 325i. First, open the rear doors of the vehicle and begin to remove the rear bench seat by pulling it upward; then remove the plastic cover of the fuel pump and disconnect the fuel lines and the electrical connector, as shown in the video.

Now, unscrew the pump ring to remove it and replace it with the new one, following the video tutorial to the end!


Updated on 6 November 2026 by ScegliAuto


Related tutorials

BMW Serie 3 (1998-2006 / E46) In this guide, find the main instructions for removing and replacing the fuel pump on the BMW 3 Series. First, open the rear doors and start by remov…
BMW Serie 3 (2005-2013 / E92, E90, E91) To replace the fuel pump on a BMW 3 Series, remove the rear seat cushions by disengaging their retaining clips. Once the seats are removed, loosen th…
BMW Serie 3 (1998-2006 / E46) Today, in this video tutorial, you will learn how to remove the fuel pump from a BMW 3 Series. First, open the trunk and remove the covering on the r…

Other guides you may be interested in

How to open the bonnet on a Volkswagen Golf?

In this tutorial, you will see how to open the bonnet on a Volkswagen Golf MK4. This is a very simple operation that follows the standard procedure. First, open the driver's door, then locate the lever in the lower left area and pull it. Next, move to the front of the vehicle, lift the bonnet slightly, and find the second lever located just above the Volkswagen logo. At this point, simply pull it towards you, fully open the bonnet, and secure it with the prop rod. To close it, gently push it down.

Watch the video!


by ScegliAuto

More videos