Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Where is the windshield wiper relay located in the BMW 3 Series?

Model: BMW Serie 3 E92, E90, E91 - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Windshield wipers

See other generations:
Video tutorial

If the windshield wipers on your BMW 3 Series have suddenly stopped working, first check the status of the relay, which is located as shown in this video. It is positioned inside the cabin, specifically behind the passenger glove compartment.

To access it, simply open the glove compartment and remove the lower panel. The relay in question is the first one at the top left when looking at the box from the front.

If it is faulty, make sure to replace it with a part that has equivalent specifications and work with the vehicle turned off.


Updated on 27 September 2026 by ScegliAuto


Related tutorials

How to Replace the Windshield Wiper Relay on a BMW 3 Series?
How to Replace the Windshield Wiper Relay on a BMW 3 Series?
BMW Serie 3 (1998-2006 / E46) To replace the windshield wiper relay on a BMW 3 Series, open the hood to access the fuse box located just below the windshield. To open it, unscrew …
How to Replace the Windshield Wiper and Turn Signal Relay on a BMW 3 Series
How to Replace the Windshield Wiper and Turn Signal Relay on a BMW 3 Series
BMW Serie 3 (2005-2013 / E92, E90, E91) Today, you will learn how to remove and replace the windshield wiper relay and the turn signal relay on a BMW 3 Series. First, get inside the vehicle…
Location of the Fuse Boxes on a BMW 3 Series E46
Location of the Fuse Boxes on a BMW 3 Series E46
BMW Serie 3 (1998-2006 / E46) In this video, you will see where the fuse boxes are located on the BMW E46 (produced from 1998 to 2006): The first fuse box is in the glove compartm…

Other guides you may be interested in

How to Reset the Tyre Pressure Warning Light on the Jeep Renegade?

To reset the tyre pressure warning light on the Jeep Renegade, inflate the tyres until they reach the recommended pressure: this value is indicated on the sticker attached to the driver’s door pillar. Once the tyres are properly inflated, navigate through the menu that appears on the instrument cluster until you find the tyre pressure option. At this point, press and hold the OK button on the right side of the steering wheel to make the warning light disappear.

Watch the video!


by ScegliAuto

More videos