|
Do it yourself
| |||
| ||||
How to replace the wiper blades of a BMW 3 Series?
Model: BMW Serie 3
G20
- Years:
2019, 2020, 2021, 2022, 2023, 2024, 2025, 2026
Video tutorial
To replace the windshield wiper blades of a BMW 3 Series, start by positioning the wipers in maintenance mode. Turn on the instrument panel without starting the engine and quickly turn it off, then move the wiper lever upwards and hold it for a few seconds. The wiper arms will position themselves vertically, making access easier. At this point, gently lift the wiper arm. Locate the blade attachment mechanism, which usually includes a tab or a clip. Press the clip to release the old blade and slide the blade outwards to remove it. Take the new blade, making sure it is compatible with the model of your BMW 3 Series. Insert it into the wiper arm following the reverse movement of the removal and hook it properly. Make sure it is securely attached to avoid issues during use. Finally, return the wiper arms to their initial position by gently lowering them. Test the system to ensure that the new blades work correctly and clean the windshield without leaving streaks or smudges.
Posted on 4 January 2025 by ScegliAuto
Related tutorials
BMW Serie 3
(2005-2013 /
E92, E90, E91)
How to replace the front wiper blades on a BMW 3 Series. Take the front wiper blade (to be replaced), pull the movable blade gently (without breaking…
BMW Serie 3
(2005-2013 /
E92, E90, E91)
Before you begin, exit the cabin of your BMW 3 Series and head to the front of the vehicle. Start by lifting the entire wiper arm, raising the blade …
BMW Serie 3
(2005-2013 /
E92, E90, E91)
Replacing the rear wiper blade is very easy and you don't even need to remove the wiper arm, which may be necessary on other models; simply lift the …
Other guides you may be interested in
|
How to Reset the Tyre Light on a Toyota Aygo?
To reset the tyre light on a Toyota Aygo, start by locating the reset button, which is found in the glove compartment of the front passenger side. Turn on the car and ensure that the tyres are at the correct pressure. Then, press and hold the reset button for a few seconds until the tyre light either flashes or turns off, depending on the model. Release the button and wait for the reset procedure to complete. Restart your Toyota Aygo and check if the tyre light has turned off, indicating that the reset was successful. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.033
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |