Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Wiper Blades on a BMW 3 Series

Model: BMW Serie 3 E91, E90, E92 - Years 2005-2013
Part: Windshield wipers

How to replace the front wiper blades on a BMW 3 Series. Take the front wiper blade (to be replaced), pull the movable blade gently (without breaking the arm) as shown in the video, and slide it off the arm. Install the new blade onto the arm (if the blade is not original, detach the piece as shown in the video), and you will hear a click indicating it is secured. Finally, lower the wiper arm onto the windshield and perform the same operation on the second blade. Test the newly installed front wiper blades. It is always preferable to use original parts for better durability and quality.

Updated on 13 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Front Windshield Wiper Blade on a BMW 3 Series
How to Replace the Front Windshield Wiper Blade on a BMW 3 Series
BMW Serie 3 (2005-2013 / E91, E90, E92) Before you begin, exit the cabin of your BMW 3 Series and head to the front of the vehicle. Start by lifting the entire wiper arm, raising the blade …
How to Replace the Windshield Washer Pump on a BMW 3 Series
BMW Serie 3 (2012-2019 / F30, F31) Below are the instructions needed to disassemble and replace the windshield washer pump on the BMW 3 Series. First, raise the vehicle and begin by re…
How to Replace the Windshield Washer Pump on a BMW 3 Series
How to Replace the Windshield Washer Pump on a BMW 3 Series
BMW Serie 3 (1998-2006 / E46) In this guide, you will learn the procedure to remove and replace the windshield washer pump on a BMW 3 Series in simple steps. First, open the hood …

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos