Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Install Rear Wiper Blade on BMW 3 Series E91

Model: BMW Serie 3 E91, E90, E92 - Years 2005-2013
Part: Windshield wipers

Replacing the rear wiper blade is very easy and you don't even need to remove the wiper arm, which may be necessary on other models; simply lift the wiper arm and use a screwdriver to pry at the connection point between the blade and the arm to release it by pushing down: the attachment is a snap fit; at this point, align the pin of the new blade with the attachment point and press until it snaps in place; a tip to preserve the blades is to use a special cleaning fluid, and if you need to leave the vehicle for a long time, it's better to lift the blades.

Updated on 6 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Front Wiper Blades on a BMW 3 Series
How to Replace the Front Wiper Blades on a BMW 3 Series
BMW Serie 3 (2005-2013 / E91, E90, E92) How to replace the front wiper blades on a BMW 3 Series. Take the front wiper blade (to be replaced), pull the movable blade gently (without breaking…
How to Replace the Front Windshield Wiper Blade on a BMW 3 Series
How to Replace the Front Windshield Wiper Blade on a BMW 3 Series
BMW Serie 3 (2005-2013 / E91, E90, E92) Before you begin, exit the cabin of your BMW 3 Series and head to the front of the vehicle. Start by lifting the entire wiper arm, raising the blade …
How to Replace the Rear Wiper Blade of the BMW 3 Series?
How to Replace the Rear Wiper Blade of the BMW 3 Series?
BMW Serie 3 (2005-2013 / E91, E90, E92) In today's video, we will see the steps to remove and replace the rear wiper blade of the BMW 3 Series. First, move to the rear of the vehicle and li…

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos