Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Windshield Wiper Blade on a BMW 3 Series

Model: BMW Serie 3 E92, E90, E91 - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Windshield wipers

See other generations:
Video tutorial

Before you begin, exit the cabin of your BMW 3 Series and head to the front of the vehicle. Start by lifting the entire wiper arm, raising the blade that needs to be replaced.

Next, position the blade perpendicular to the support arm. Once done, gently pull the blade toward your left. This will free the front windshield wiper blade, completing the removal.

To install the new blade and reposition the wiper arm, reverse these instructions, and the replacement will be complete.


Updated on 21 April 2026 by ScegliAuto


Related tutorials

How to Replace the Front Wiper Blades on a BMW 3 Series
How to Replace the Front Wiper Blades on a BMW 3 Series
BMW Serie 3 (2005-2013 / E92, E90, E91) How to replace the front wiper blades on a BMW 3 Series. Take the front wiper blade (to be replaced), pull the movable blade gently (without breaking…
How to Replace the Front Wipers on a BMW 3 Series
How to Replace the Front Wipers on a BMW 3 Series
BMW Serie 3 (2005-2013 / E92, E90, E91) Follow these step-by-step instructions to remove and replace the front wipers on your BMW 3 Series in simple and quick steps. First, move to the fron…
How to Install Windshield Wipers on a BMW 3 Series E90
How to Install Windshield Wipers on a BMW 3 Series E90
BMW Serie 3 (2005-2013 / E92, E90, E91) Replacing the windshield wiper blades is maintenance that can certainly be done as a DIY project without much difficulty. The first step is to choose…

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos