Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Wipers on a BMW 3 Series

Model: BMW Serie 3 E92, E90, E91 - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Windshield wipers

See other generations:
Video tutorial

Follow these step-by-step instructions to remove and replace the front wipers on your BMW 3 Series in simple and quick steps. First, move to the front of your car and lift the front wiper arms; then, release the clip of the front wiper and rotate it to remove the wiper blade from the arm, as shown in the video.

Now, install the new wiper that has the same dimensions; secure the clip to complete the replacement, and then replace the other wiper!


Updated on 7 June 2026 by ScegliAuto


Related tutorials

How to Replace the Front Wiper Blades on a BMW 3 Series
How to Replace the Front Wiper Blades on a BMW 3 Series
BMW Serie 3 (2005-2013 / E92, E90, E91) How to replace the front wiper blades on a BMW 3 Series. Take the front wiper blade (to be replaced), pull the movable blade gently (without breaking…
How to Remove the Front Wiper Motor from a BMW 3 Series
How to Remove the Front Wiper Motor from a BMW 3 Series
BMW Serie 3 (1998-2006 / E46) Before starting, open the hood of your BMW 3 Series. Begin by removing the air filter by simply unhooking the fastening clips, then take out the air …
How to Replace the Windshield Wiper Relay on a BMW 3 Series?
How to Replace the Windshield Wiper Relay on a BMW 3 Series?
BMW Serie 3 (1998-2006 / E46) To replace the windshield wiper relay on a BMW 3 Series, open the hood to access the fuse box located just below the windshield. To open it, unscrew …

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos