Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Front Wiper Motor from a BMW 3 Series

Model: BMW Serie 3 E46 - Years: 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006
Part: Windshield wipers

See other generations:
Video tutorial

Before starting, open the hood of your BMW 3 Series. Begin by removing the air filter by simply unhooking the fastening clips, then take out the air filter itself.

After that, unclip the wiring cover and lower it. At this point, unscrew the screws that secure the air filter housing, then remove it. Once removed, you will reach the wiper motor. Proceed by removing the front wipers.

Now, you can unscrew the mounting bolts of the motor, disconnect the corresponding connector, and finally remove it. The disassembly will be complete.


Updated on 3 April 2026 by ScegliAuto


Related tutorials

How to Replace the Front Wipers on a BMW 3 Series
How to Replace the Front Wipers on a BMW 3 Series
BMW Serie 3 (2005-2013 / E92, E90, E91) Follow these step-by-step instructions to remove and replace the front wipers on your BMW 3 Series in simple and quick steps. First, move to the fron…
Replacing the windshield wiper motor on the BMW 3 Series
Replacing the windshield wiper motor on the BMW 3 Series
BMW Serie 3 (2005-2013 / E92, E90, E91) This guide provides instructions for removing and replacing the windshield wiper motor on the BMW 3 Series. First, open the hood of the vehicle and s…
How to Replace the Windshield Wiper Relay on a BMW 3 Series?
How to Replace the Windshield Wiper Relay on a BMW 3 Series?
BMW Serie 3 (1998-2006 / E46) To replace the windshield wiper relay on a BMW 3 Series, open the hood to access the fuse box located just below the windshield. To open it, unscrew …

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos