Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Windshield Wiper Relay on a BMW 3 Series?

Model: BMW Serie 3 E46 - Years 1998-2006
Part: Fuse box

To replace the windshield wiper relay on a BMW 3 Series, open the hood to access the fuse box located just below the windshield. To open it, unscrew its mounting screws: it contains 4 relays and 5 fuses. The wiper fuse is the one located at the top right and is usually yellow. This can then be disconnected and replaced with a new replacement part; the new relay should be inserted to ensure that the wipers function correctly.

Updated on 24 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Windshield Wiper and Turn Signal Relay on a BMW 3 Series
How to Replace the Windshield Wiper and Turn Signal Relay on a BMW 3 Series
BMW Serie 3 (2005-2013 / E91, E90, E92) Today, you will learn how to remove and replace the windshield wiper relay and the turn signal relay on a BMW 3 Series. First, get inside the vehicle…
Where is the windshield wiper relay located in the BMW 3 Series?
Where is the windshield wiper relay located in the BMW 3 Series?
BMW Serie 3 (2005-2013 / E91, E90, E92) If the windshield wipers of our BMW 3 Series have suddenly stopped working, we can first check the status of the respective relay whose position is i…
How to Replace the Front Wipers on a BMW 3 Series
How to Replace the Front Wipers on a BMW 3 Series
BMW Serie 3 (2005-2013 / E91, E90, E92) Follow these step-by-step instructions to remove and replace the front wipers on your BMW 3 Series in simple and quick steps. First, move to the fron…

Other guides you may be interested in

    Frequently Asked Questions

    • Serie 3 2005-2013 - What is the cigarette lighter fuse of the BME 3 Series 318d e90? Read answer
    • Serie 3 1998-2006 - Where is the airbag fuse located on BMW 3 Series E46? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos