Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Windshield Wiper and Turn Signal Relay on a BMW 3 Series

Model: BMW Serie 3 E92, E90, E91 - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013

See other generations:
Video tutorial

Today, you will learn how to remove and replace the windshield wiper relay and the turn signal relay on a BMW 3 Series. First, get inside the vehicle and start by removing the steering wheel airbag by disconnecting the connector located at the back.

Then, use a socket wrench with an extension to unscrew the steering wheel bolt to remove it, as shown in the video. Now, remove the windshield wiper and turn signal relays by disconnecting the electrical connectors.

Replace and reinstall everything by following the reverse procedure!


Updated on 19 May 2026 by ScegliAuto


Related tutorials

BMW Serie 3 (1998-2006 / E46) To replace the windshield wiper relay on a BMW 3 Series, open the hood to access the fuse box located just below the windshield. To open it, unscrew …
BMW Serie 3 (1998-2006 / E46) In this video, you will see where the fuse boxes are located on the BMW E46 (produced from 1998 to 2006): The first fuse box is in the glove compartm…
BMW Serie 3 (2005-2013 / E92, E90, E91) If the windshield wipers on your BMW 3 Series have suddenly stopped working, first check the status of the relay, which is located as shown in this v…

Other guides you may be interested in

How to Open the Fuel Filler Flap in the Hyundai i30?

In this tutorial, you will learn how to open the fuel filler flap in the Hyundai i30, a very simple operation that follows the typical procedure of most vehicles. First, unlock the locks using the designated button on the remote, then open the driver's door, locate the release lever on the left side of the seat, and operate it. Next, move to the fuel filler flap, open it completely, unscrew the cap, and refuel as needed. To close the flap, simply press it gently.

Watch the video!


by ScegliAuto

More videos