Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the windshield wiper motor on the BMW 3 Series

Model: BMW Serie 3 E92, E90, E91 - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013

See other generations:
Video tutorial

This guide provides instructions for removing and replacing the windshield wiper motor on the BMW 3 Series. First, open the hood of the vehicle and start removing the wipers and arms by unscrewing the screws located at the base; then remove the upper plastic cover as shown in the video.

At this point, unscrew the screws of the wiper mechanism, disconnecting the electrical wiring of the motor; separate the motor from the mechanism, then replace the component with the new original one, following the video tutorial to the end!


Posted on 19 September 2026 by ScegliAuto


Related tutorials

How to Remove the Front Wiper Motor from a BMW 3 Series
How to Remove the Front Wiper Motor from a BMW 3 Series
BMW Serie 3 (1998-2006 / E46) Before starting, open the hood of your BMW 3 Series. Begin by removing the air filter by simply unhooking the fastening clips, then take out the air …
Replacing the Starter Motor on BMW 3 Series
Replacing the Starter Motor on BMW 3 Series
BMW Serie 3 (1998-2006 / E46) Let's replace the starter motor on a BMW 3 Series. Raise the hood and secure it. Remove the starter motor covers, disconnect the battery terminals an…
Removing the Starter Motor on the BMW 3 Series E46 320D
BMW Serie 3 (1998-2006 / E46) Today, you will learn how to remove the starter motor on the BMW 3 Series E46 320D by following the instructions below. First, open the hood and remo…

How to Reset the AdBlue Warning Light on a Peugeot Boxer

To reset the AdBlue system on a 2018 Peugeot Boxer, follow these steps: Start the engine and ensure the vehicle is parked in a well-ventilated area. Locate the "MENU" button on the dashboard or steering wheel controls. Press and hold the "MENU" button until the menu options appear on the display. Use the arrow buttons or scroll wheel to access the "Vehicle Settings" or "Settings" menu. Select the "AdBlue" or "AdBlue System" option. Look for the "Recharge" or "Reset" option in the AdBlue menu. Once you find the reset option, select it and confirm your choice when prompted. The system will be reset, and a confirmation message may appear on the display. Turn off the engine and wait a few seconds. Restart the engine and check that the AdBlue system has been reset.

Watch the video!


by ScegliAuto

More videos