Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Install Windshield Wipers on a BMW 3 Series E90

Model: BMW Serie 3 E92, E90, E91 - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Windshield wipers

See other generations:
Video tutorial

Replacing the windshield wiper blades is maintenance that can certainly be done as a DIY project without much difficulty. The first step is to choose and purchase new blades: it is advisable to opt for a quality product that ensures excellent durability and perfect adherence to the windshield.

The replacement is quite easy; simply lift the wiper arm, rotate the blade 90 degrees, and slide it off the anchoring pin. Insert the new blade onto the same pin, keeping it at a 90-degree angle to the arm, then rotate it parallel to the arm and lower it onto the windshield.


Updated on 3 March 2026 by ScegliAuto


Related tutorials

How to Replace the Front Windshield Wiper Blade on a BMW 3 Series
How to Replace the Front Windshield Wiper Blade on a BMW 3 Series
BMW Serie 3 (2005-2013 / E92, E90, E91) Before you begin, exit the cabin of your BMW 3 Series and head to the front of the vehicle. Start by lifting the entire wiper arm, raising the blade …
How to Replace the Front Wipers on a BMW 3 Series
How to Replace the Front Wipers on a BMW 3 Series
BMW Serie 3 (2005-2013 / E92, E90, E91) Follow these step-by-step instructions to remove and replace the front wipers on your BMW 3 Series in simple and quick steps. First, move to the fron…
How to Replace the Wipers on the BMW E90
How to Replace the Wipers on the BMW E90
BMW Serie 3 (2005-2013 / E92, E90, E91) Wipers are undoubtedly some of the most used components of your car. For this reason, they are also very prone to wear and potential malfunctions or …

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos