Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Front Seat of a BMW 3 Series

Model: BMW Serie 3 E91, E90, E92 - Years 2005-2013
Part: Seat

Is the front seat of your BMW 3 Series due for a change? Here’s how to remove it. Remove the securing screw located under the seatbelt. Move the seat forward (using the electric buttons) and raise the seat cushion. Next, remove the securing screws located on the rear track. Move the seat back and remove the securing pins from the front of the track (using the electric buttons). Finally, disconnect the power connectors for the front seat. Lift the seat out and remove it from the vehicle. Install the new seat by reversing the disassembly steps mentioned earlier. Secure the seatbelt over the seat.

Updated on 17 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Removing the Front Headrest on a BMW 3 Series
Removing the Front Headrest on a BMW 3 Series
BMW Serie 3 (2012-2019 / F30, F31) How do you remove the front headrest from your car? Let's see how to remove the headrest from above the BMW seat. Open the door and enter the back of…
How to Replace the Front Seat Cover of a BMW 3 Series?
How to Replace the Front Seat Cover of a BMW 3 Series?
BMW Serie 3 (1998-2006 / E46) To replace the front seat cover of a BMW 3 Series, use a tool to pry off the plastic covers located on the sides of the seat. Once these covers are r…
Removing the Seat Handle of the BMW 3 Series
Removing the Seat Handle of the BMW 3 Series
BMW Serie 3 (1990-2001 / E36) This guide will show you the main steps to remove and replace the front seat handle of the BMW 3 Series. First, open the driver's side front door and…

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos