Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Air Filter

Model: BMW X3 MK 1, E83 - Years 2003-2010
Part: Air filter

In this tutorial, you will replace the engine air filter of a BMW X3. After obtaining the correct filter, open the hood. Using a flathead screwdriver, disconnect the electrical connection of the air pump, then unclip the clips holding the filter compartment closed. Lift and remove the cover to access the filter to be replaced. Remove the old filter and replace it with a completely new one, ensuring it is positioned in the same orientation. Make sure it fits snugly in its housing. Once this operation is complete, reassemble everything by reversing the disassembly steps.

Updated on 16 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Cabin Air Filter
Replacing the Cabin Air Filter
BMW X3 (2003-2010 / MK 1, E83) The cabin air filter is located in the engine compartment, just below the windshield, in a central position: unscrew the three screws securing the fi…
How to replace the cabin air filter on BMW X3 F25
How to replace the cabin air filter on BMW X3 F25
BMW X3 (2010-2017 / F25, MK 2) The cabin air filter of the BMW X3 F25 is accessed through the engine compartment since the filter is located on the passenger side just under the wi…
How to replace the engine air filter of the BMW X3
How to replace the engine air filter of the BMW X3
BMW X3 (2003-2010 / MK 1, E83) These short and simple steps will allow us to disassemble and replace the engine air filter of the BMW X3. First, we open the car's engine hood and s…

Other guides you may be interested in

How to Remove the Front Seats from a Classic Fiat 500

How to remove the front seats from a classic Fiat 500? In this video, follow these steps: first, slide the seats forward and lift them up, then unscrew the retaining bolts on the rails fixed to the car's chassis using a socket or impact driver (use appropriate release agents if the bolts do not unscrew). Remove the retaining bolts at the bottom of the car (use spanners on both the upper and lower parts of the connecting bolts). Finally, install the new front seat by following the disassembly steps mentioned earlier.

Watch the video!


by ScegliAuto

More videos