Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. BMW
    3. :
  3. X3
    4. : How to replace the cabin air filter on BMW X3 F25

BMW X3 - Video tutorial

Model: BMW X3 F25, MK 2 - Years 2010-2017
Part: Cabin air filter
Operation: How to replace the cabin air filter on BMW X3 F25

The cabin air filter of the BMW X3 F25 is accessed through the engine compartment since the filter is located on the passenger side just under the windshield; here, in fact, there is a more or less triangular shaped plastic grille which must be removed after removing the gaskets on the edges; once the grille has been removed, the lid of the filter container must be removed, the filter removed, any residual dirt removed and the new filter inserted respecting the direction of the air flow; when replacing the filter, it is also advisable to sanitize the passenger compartment.


Posted on 17 December 2023 by ScegliAuto



How do you replace the cabin filter of the BMW X3?
BMW X3 (2010-2017 / F25, MK 2) In order to replace the cabin filter of the BMW X3, you need to open the hood so that you can access the components in the upper part of the engine c
How to replace the cabin air filter in the BMW X3.
BMW X3 (2010-2017 / F25, MK 2) To correctly and independently replace the cabin filter of your BMW X3 (2010-2017), you only need a few simple steps that we will discover step by st
BMW X3 cabin air filter replacement
BMW X3 (2003-2010 / MK 1, E83) Let's see the disassembly of the cabin air filter of a BMW X3. Lift the front hood to access the cabin air filter: the filter is stored in the plasti

Other guides that may interest you

How do you replace the horn on the Citroà «n Berlingo?

In order to replace the horn on the Citroà «n Berlingo, the vehicle must be raised so that the screws that secure the left front wheel can be loosened and removed completely. Once this wheel has been removed, it will be possible to access the screws that secure the internal cover of the corresponding wheel arch: this will have to be detached and it will be possible to access the components inside, including the horn. This will need to be disconnected from its connector and removed from its holders, so that it can be replaced with a new spare part.

Watch the video!


by ScegliAuto

More videos