Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the engine air filter of the BMW X3 F25

Model: BMW X3 MK 2, F25 - Years 2010-2017
Part: Cabin air filter

If you don't know how to replace the engine air filter of your BMW X3 F25, don't worry because below you will find a description of all the steps to follow. First of all, make sure you have a new air filter compatible with your car, then lift the front hood and proceed with the removal of the engine protection cover. Once this is done, locate the air filter box and replace the old filter with the new one. Finally, reassemble the engine protection cover and the procedure is complete.

Posted on 15 August 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Cabin Air Filter on BMW X3 F25
How to Replace the Cabin Air Filter on BMW X3 F25
BMW X3 (2010-2017 / MK 2, F25) Access the cabin air filter on the BMW X3 F25 through the engine compartment, as the filter is located on the passenger side just below the windshiel…
How to Replace the Cabin Air Filter in a BMW X3
How to Replace the Cabin Air Filter in a BMW X3
BMW X3 (2010-2017 / MK 2, F25) Before you can start, sit in the front passenger seat of your BMW X3. First, open the glove compartment. Then, unclip and remove the upper cover of t…
Where is the fuse box of the BMW X3 F25 located?
Where is the fuse box of the BMW X3 F25 located?
BMW X3 (2010-2017 / MK 2, F25) Locating the box containing all the fuses of your BMW X3 F25 is really simple. All you have to do is read the following guide and follow step by step…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos