Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Installing LED Interior Lights

Model: BMW Serie 3 E92, E90, E91 - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Interior dome light bulb

See other generations:
Video tutorial

Replacing the original interior lights with LED ones will give the car's interior a much more modern and appealing look, as well as improve visibility. Start with the front dome light using a plastic pry tool to detach the lens cover; then remove the original center bulb and install the LED bulb (T10 base); remove the side light housing to access the bulb and replace it as well (if it does not light up, rotate the bulb 180 degrees since LEDs have polarity that must be observed); finally, replace the bulb in the scuff plate and then the one under the door panel.


Updated on 17 February 2026 by ScegliAuto


Related tutorials

How to Install a Fiber Optic LED Kit in Your Car
How to Install a Fiber Optic LED Kit in Your Car
BMW Serie 3 (1998-2006 / E46) The video explains how to install a fiber optic LED kit to illuminate the interior of your car, with a cost of about $20-$30. The kit includes: a fle…
How to Replace Traditional Bulbs with LED Bulbs
How to Replace Traditional Bulbs with LED Bulbs
BMW Serie 3 (2005-2013 / E92, E90, E91) The following video will show you how to replace the traditional bulbs in your car with the increasingly popular LED bulbs. These are specific operat…
Replacing Cabin Dome Lights with LED
Replacing Cabin Dome Lights with LED
BMW Serie 3 (1998-2006 / E46) Choose a replacement bulb identical to the one being replaced. Remove the dome light to access the socket by gently prying the outer edge with a plas…

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos