Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Instructions for Disassembling the Ashtray Compartment

Model: BMW Serie 3 E46 - Years: 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006
Part: Center console tunnel

See other generations:
Video tutorial

If the ashtray compartment lid does not close anymore, you need to disassemble it. Start by pulling the knob of the gear shift lever, then remove the shift boot. Next, disassemble the trim at the base of the gear shift lever by disconnecting the connectors for the crystal buttons.

Then, remove the small storage compartment located just below the climate control buttons to access the screws securing the ashtray compartment. This will allow you to extract it from its location and complete the disassembly by removing the anti-skid button bar attached to it.


Updated on 18 February 2026 by ScegliAuto


Related tutorials

How to Remove the Rear Ashtray from a BMW 3 Series
How to Remove the Rear Ashtray from a BMW 3 Series
BMW Serie 3 (2005-2013 / E92, E90, E91) In this video, let's see how to remove the rear ashtray from the center console of a BMW 3 Series. Use a plastic trim tool to pry around the plastics…
Guide to Remove the Interior Fuse Box of the BMW 3 Series E90
Guide to Remove the Interior Fuse Box of the BMW 3 Series E90
BMW Serie 3 (2005-2013 / E92, E90, E91) In this guide, you will learn the main steps to remove and replace the interior fuse box of the BMW 3 Series E90. First, get inside the vehicle on th…
Instructions for Removing the Rear Headlight
Instructions for Removing the Rear Headlight
BMW Serie 3 (1998-2006 / E46) Removing the rear headlight is very simple, but you need to remove some elements inside the trunk to access the headlight mounting; open the trunk, r…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos