Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Guide to Remove the Interior Fuse Box of the BMW 3 Series E90

Model: BMW Serie 3 E91, E90, E92 - Years 2005-2013
Part: Fuse box

In this guide, you will learn the main steps to remove and replace the interior fuse box of the BMW 3 Series E90. First, get inside the vehicle on the passenger side and start by removing the glove compartment; to do this, open it and detach the side hinge pins, then unscrew the mounting screws located under the glove compartment. At this point, you will find the fuse box at the back; disconnect the electrical connectors from the fuse holder to remove it. Finally, replace the entire part with the original one and reassemble everything!

Updated on 30 May 2026 by ScegliAuto

Video tutorial

Related tutorials

Where to Find the Fuse Box of the BMW 3 Series E90
Where to Find the Fuse Box of the BMW 3 Series E90
BMW Serie 3 (2005-2013 / E91, E90, E92) The fuse box in your BMW 3 Series E90 (model years 2005-2013) is located in a well-hidden position within the cabin, making it not always easy to fin…
How to Replace the Cabin Air Filter in a BMW 3 Series E90
How to Replace the Cabin Air Filter in a BMW 3 Series E90
BMW Serie 3 (2005-2013 / E91, E90, E92) This video tutorial shows how to replace the cabin air filter in a BMW 3 Series E90. First, open the hood and secure it to keep it open. Using a 8mm …
How do you remove the fuse box of the BMW 3 Series e90?
BMW Serie 3 (2005-2013 / E91, E90, E92) The fuse box is the one that houses, precisely, the fuses, which are responsible for protecting electronic and electrical utilities in the car from o…

Other guides you may be interested in

    Frequently Asked Questions

    • Serie 3 2005-2013 - What is the cigarette lighter fuse of the BME 3 Series 318d e90? Read answer
    • Serie 3 1998-2006 - Where is the airbag fuse located on BMW 3 Series E46? Read answer

How to reset the tyre pressure warning light on the Suzuki Jimny?

To reset the tyre pressure warning light on the Suzuki Jimny, first inflate the tyres to the pressure value indicated on the corresponding sticker: this is located at the bottom of the driver's door pillar. Once the tyres are inflated, insert the ignition key and turn on the instrument panel: select the screen that indicates the tyre pressures, checking that the values change. After a few seconds, the tyre pressure warning light will automatically turn off.

Watch the video!


by ScegliAuto

More videos