Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Remove the Interior Fuse Box of the BMW 3 Series E90

Model: BMW Serie 3 E92, E90, E91 - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Fuse box

See other generations:
Video tutorial

Today, you will learn how to remove and replace the interior fuse box of the BMW 3 Series E90 by following these simple steps. First, get inside the car and start by removing the glove compartment; to do this, unscrew the screws located at the bottom and detach the pins from the two side rods, as shown in the video.

At this point, remove the fuse box located at the back by disconnecting all the electrical wires; then, replace it with the new one, applying the reverse procedure for reassembly!


Updated on 30 May 2026 by ScegliAuto


Related tutorials

Removing Rear Seats BMW 3 Series E90
Removing Rear Seats BMW 3 Series E90
BMW Serie 3 (2005-2013 / E92, E90, E91) In this video tutorial, you will learn how to remove the rear seats of the BMW 3 Series E90. First, start by removing the lower parts of the seats by…
Removing the Door Lock Actuator on BMW 3 Series E90 - Z3
Removing the Door Lock Actuator on BMW 3 Series E90 - Z3
BMW Serie 3 (2005-2013 / E92, E90, E91) In this video tutorial, you will learn how to remove the front door actuator on the BMW 3 Series E90, as well as on the BMW E60 and Z3. First, open t…
Removing Door Panel on BMW 3 Series E90
Removing Door Panel on BMW 3 Series E90
BMW Serie 3 (2005-2013 / E92, E90, E91) In this video tutorial, you will learn how to remove the door panel of a BMW 3 Series E90. First, open the front door and remove the plastic trim by …

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos