Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing Rear Seats BMW 3 Series E90

Model: BMW Serie 3 E92, E90, E91 - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Seat

See other generations:
Video tutorial

In this video tutorial, you will learn how to remove the rear seats of the BMW 3 Series E90. First, start by removing the lower parts of the seats by manually releasing them with force; they will come out as a single block. Move the seatbelts out of the way and remove them.

Now, unscrew the 50 mm Torx screws to also remove the upper part. Remove the side plastic panel and unscrew the 50 mm Torx screws anchoring the seats; then lower the backrest and proceed to remove one backrest at a time.

Repeat the reverse procedure for installation!


Updated on 19 March 2026 by ScegliAuto


Related tutorials

How to Lower the Rear Seats of the BMW 3 Series
How to Lower the Rear Seats of the BMW 3 Series
BMW Serie 3 (2005-2013 / E92, E90, E91) This guide briefly outlines the steps to lower the rear seats of the BMW 3 Series, increasing the trunk space, following the instructions below. Firs…
How to Remove the Rear Seats of a BMW 3 Series
How to Remove the Rear Seats of a BMW 3 Series
BMW Serie 3 (2005-2013 / E92, E90, E91) Let's see how to remove the rear seats of a BMW 3 Series. Remove the seat bottom (lift the seat by hand) until it completely detaches from the floor …
How to Remove the Rear Seats of the BMW 3 Series
How to Remove the Rear Seats of the BMW 3 Series
BMW Serie 3 (2012-2019 / F31, F30) Today, let's go over the instructions for removing the rear seats and bench of the BMW 3 Series. First, open the rear doors and start by removing the…

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos