Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing Door Panel on BMW 3 Series E90

Model: BMW Serie 3 E92, E90, E91 - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Door trim panel

See other generations:
Video tutorial

In this video tutorial, you will learn how to remove the door panel of a BMW 3 Series E90. First, open the front door and remove the plastic trim by disengaging it from the rear clips. Next, take off the grab handle and unscrew the screws located underneath using a Torx screwdriver.

At this point, unscrew all the other screws on the door panel and then pry on the edges of the panel at multiple points. Finally, disengage and remove the panel by disconnecting the speaker's electrical connector and the handle cable!


Updated on 18 April 2026 by ScegliAuto


Related tutorials

Removing the Central Locking Module from BMW 3 Series E90
Removing the Central Locking Module from BMW 3 Series E90
BMW Serie 3 (2005-2013 / E92, E90, E91) Follow these simple instructions to remove the central locking module from a BMW 3 Series E90. First, open the front door and remove the door panel b…
Removing the Door Lock Actuator on BMW 3 Series E90 - Z3
Removing the Door Lock Actuator on BMW 3 Series E90 - Z3
BMW Serie 3 (2005-2013 / E92, E90, E91) In this video tutorial, you will learn how to remove the front door actuator on the BMW 3 Series E90, as well as on the BMW E60 and Z3. First, open t…
How to Remove the Door Panel of a BMW 3 Series?
How to Remove the Door Panel of a BMW 3 Series?
BMW Serie 3 (2005-2013 / E92, E90, E91) Before you begin, open the door of your BMW 3 Series. Start by prying and removing the inserts from the door panel using a thin but sturdy tool. Once…

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos