Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Cleaning and Washing Instructions for Door Panel Upholstery

Model: BMW Serie 3 E46 - Years 1998-2006
Part: Checks and maintenance

The door panel upholstery has a certain roughness where dirt tends to accumulate. To effectively remove it, use a specific cleaner and, above all, a soft-bristled brush to gently scrub the surface. Before washing the entire panel, test the cleaner on a small area, preferably in an inconspicuous spot. Once you are sure it won't cause damage, wash the entire panel and rinse with a microfiber cloth, repeating the process multiple times if necessary.

Updated on 18 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Throttle Body Cleaning Instructions
Throttle Body Cleaning Instructions
BMW Serie 3 (1998-2006 / E46) Remove the air filter housing by disconnecting the front intake duct and the hose connected to the mass air flow sensor. Disconnect the connector att…
How to Remove the Rear Door Panel on a BMW 3 Series
How to Remove the Rear Door Panel on a BMW 3 Series
BMW Serie 3 (2005-2013 / E91, E90, E92) How to remove the door panel on a BMW 3 Series. Let's look at removing the cover panel. Remove the trim plastic under the inner door handle, unscrew …
Remove the Front Door Panel on BMW 3
Remove the Front Door Panel on BMW 3
BMW Serie 3 (1998-2006 / E46) Is the door panel damaged or do you want to remove it to replace some parts? Let's see how to remove the door panel on a BMW 3 Series. Remove the tri…

    Frequently Asked Questions

    • Serie 3 2012-2019 - How much does a service cost for the BMW 3 Series? Read answer
    • Serie 3 2005-2013 - Why is the on-board computer of the BMW 3 Series slow to start up? Read answer

How to Replace the External Wing Mirror on a Ford C MAX

In the event of a breakage, it will be necessary to replace the external wing mirror on the 2011 Ford C MAX. This operation is easily performed independently. Start by removing the internal cover of the mirror with a plastic lever. Then, use a socket wrench to remove the securing pins. Once the pins are removed, you can take off the mirror, but not before disconnecting the power connectors. Then proceed to fit the new mirror. First, connect the connectors and then secure the mirror to its housing with the pins. Refit the plastic cover and test the operation of the electric mirror using the controls.

Watch the video!


by ScegliAuto

More videos