Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Throttle Body Cleaning Instructions

Model: BMW Serie 3 E46 - Years 1998-2006
Part: Throttle body

Remove the air filter housing by disconnecting the front intake duct and the hose connected to the mass air flow sensor. Disconnect the connector attached to the mass air flow sensor and remove it from its hose; continue by removing the various intake hoses, disconnecting any tubes and fittings until you reach the throttle body. Clean the throttle body with appropriate spray, wiping away any residue with a clean rag: if necessary, repeat the cleaning process multiple times. Unscrew the throttle body mounting screws and remove it from its location: complete the cleaning with the appropriate spray. Reassemble everything, and if the previously removed hoses show any damage, replace them with new ones.

Updated on 5 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Clean the Throttle Body
How to Clean the Throttle Body
BMW Serie 3 (1998-2006 / E46) First, remove the plastic tube connected to the element where the throttle body is located. Do this by unscrewing the clamps that hold it in place an…
How to Replace the Throttle Body on a BMW 3 Series?
How to Replace the Throttle Body on a BMW 3 Series?
BMW Serie 3 (2012-2019 / F30, F31) To replace the throttle body on a BMW 3 Series, open the hood and access the engine compartment, specifically at the rear of the engine block. The th…
How to Replace the Intake Manifold on a BMW 3 Series 320d
How to Replace the Intake Manifold on a BMW 3 Series 320d
BMW Serie 3 (2005-2013 / E91, E90, E92) This guide provides the main instructions on how to remove and replace the intake manifold on a BMW 3 Series 320d. First, open the hood of the vehicl…

Other guides you may be interested in

How to reset the tyre pressure warning light on the Suzuki Jimny?

To reset the tyre pressure warning light on the Suzuki Jimny, first inflate the tyres to the pressure value indicated on the corresponding sticker: this is located at the bottom of the driver's door pillar. Once the tyres are inflated, insert the ignition key and turn on the instrument panel: select the screen that indicates the tyre pressures, checking that the values change. After a few seconds, the tyre pressure warning light will automatically turn off.

Watch the video!


by ScegliAuto

More videos