Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Throttle Body on a BMW 3 Series?

Model: BMW Serie 3 F30, F31 - Years 2012-2019
Part: Throttle body

To replace the throttle body on a BMW 3 Series, open the hood and access the engine compartment, specifically at the rear of the engine block. The throttle body is located between the intake manifold and the air filter; therefore, it can be removed from its housing by unscrewing all the bolts and screws and disconnecting the connectors. Once the part is freed, you can extract it from its housing and replace it with a new replacement part, which should be properly inserted and secured.

Updated on 2 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Clean the Throttle Body
How to Clean the Throttle Body
BMW Serie 3 (1998-2006 / E46) First, remove the plastic tube connected to the element where the throttle body is located. Do this by unscrewing the clamps that hold it in place an…
Throttle Body Cleaning Instructions
Throttle Body Cleaning Instructions
BMW Serie 3 (1998-2006 / E46) Remove the air filter housing by disconnecting the front intake duct and the hose connected to the mass air flow sensor. Disconnect the connector att…
How to Replace the Intake Manifold on a BMW 3 Series 320d
How to Replace the Intake Manifold on a BMW 3 Series 320d
BMW Serie 3 (2005-2013 / E91, E90, E92) This guide provides the main instructions on how to remove and replace the intake manifold on a BMW 3 Series 320d. First, open the hood of the vehicl…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos