Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Remove the Front Door Panel on BMW 3

Model: BMW Serie 3 E46 - Years: 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006
Part: Door trim panel

See other generations:
Video tutorial

Is the door panel damaged or do you want to remove it to replace some parts? Let's see how to remove the door panel on a BMW 3 Series. Remove the trim piece at the top of the panel, disconnect the window switch (unplug the power connectors).

Remove all the screw cover caps. Unscrew all the screws on the door panel and detach the retaining clips.

Pull the panel away by hand and unclip it from the door (disconnect the power harness and the opening cable). Replace the door.

Install the damaged parts inside the door or the panel itself.


Updated on 19 March 2026 by ScegliAuto


Related tutorials

Removing the Front Door Panel of the BMW 3 Series
Removing the Front Door Panel of the BMW 3 Series
BMW Serie 3 (2012-2019 / F31, F30) Today, we will see the necessary instructions to remove and replace the front door panel of the BMW 3 Series, following these simple steps. First, op…
Disassembly of the front door panel of the BMW 3 Series.
Disassembly of the front door panel of the BMW 3 Series.
BMW Serie 3 (2012-2019 / F31, F30) In a few simple steps, we will see the process of disassembling the front door panel of the BMW 3 Series. First, we open the front door of the car an…
Remove Thermostat on BMW 3 Series
Remove Thermostat on BMW 3 Series
BMW Serie 3 (1998-2006 / E46) Removing a faulty thermostat on a BMW 3 Series? Let's go through the disassembly from inside the engine compartment. Lift the hood and secure it. Rem…

How to lower the rear seats in the Peugeot 206?

In this tutorial, you will see how to lower the rear seats in the Peugeot 206, a very simple and quick operation, for example, if you need more space in the boot. First, open both the doors and the tailgate, then unclip the seat base and position it vertically. Next, remove the horizontal partition, locate the release levers at the ends of both seatbacks, and, by operating them, lower the seatbacks. To reassemble everything, simply follow the reverse procedure.

Watch the video!


by ScegliAuto

More videos