Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Disassembly of the front door panel of the BMW 3 Series.

Model: BMW Serie 3 F30, F31 - Years 2012-2019
Part: Door trim panel

Today we will see the necessary instructions to disassemble and replace the front door panel of the BMW 3 Series, following these simple steps. First, open the front door and start by removing the plastic cover of the handle, levering on the sides; then remove the window switch panel, disconnecting the electrical connector found underneath, as shown in the video. At this point, lever on the sides of the panel to detach and remove it, disconnecting the handle cable; in this way, you can access the speaker or the window mechanism!

Posted on 27 April 2024 by ScegliAuto

Video tutorial

Related tutorials

Disassembly of the front door panel of the BMW 3 Series.
Disassembly of the front door panel of the BMW 3 Series.
BMW Serie 3 (2012-2019 / F30, F31) In a few simple steps, we will see the process of disassembling the front door panel of the BMW 3 Series. First, we open the front door of the car an…
Disassembly of the door panel of the BMW 3 Series
Disassembly of the door panel of the BMW 3 Series
BMW Serie 3 (2012-2019 / F30, F31) Today's instructions will show us the process of disassembling and replacing the front door panel of the BMW 3 Series. First, we get into the car and…
How to Remove the Door Panel of a BMW 3 Series?
How to Remove the Door Panel of a BMW 3 Series?
BMW Serie 3 (2005-2013 / E91, E90, E92) Before you begin, open the door of your BMW 3 Series. Start by prying and removing the inserts from the door panel using a thin but sturdy tool. Once…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos