Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the car radio in the BMW X1?

Model: BMW X1 E84 - Years 2009-2015
Part: Car stereo

As we can see in this tutorial, replacing the car radio in the BMW X1 is a very simple and fast operation. Before proceeding, make sure that the key is not inserted so that you can work safely. Let's start by removing the cover containing the air vents, then unscrew the two screws in the storage compartment and remove it. Next, remove the lower panel, disassemble the climate control console, and remove the two screws of the car radio. At this point, we can extract the module from the dashboard, disconnect the rear connectors, and install the replacement if necessary.

Posted on 30 July 2023 by ScegliAuto

Video tutorial

Related tutorials

Where are the fuses of the BMW X1 located?
Where are the fuses of the BMW X1 located?
BMW X1 (2009-2015 / E84) The fuses of the BMW X1 are divided inside the two fuse boxes that are installed on the vehicle: in this car model there are two boxes that contain t…
How to Remove the Dashboard of the BMW X1
How to Remove the Dashboard of the BMW X1
BMW X1 (2009-2015 / E84) In this guide, you will find instructions to remove the entire dashboard of the BMW X1. First, get inside the cabin and start by removing the center …
Where is the fuse box on the BMW X1
Where is the fuse box on the BMW X1
BMW X1 (2009-2015 / E84) If you want to be able to independently identify the position of the fuse box of your BMW X1 first series (year 2009-2015) all you have to do is read…

Other guides you may be interested in

How to Remove the Headlight Bulbs on a Toyota Rav4

Let's see how to remove the headlight bulbs on a Toyota Rav4. Open the bonnet by pulling the lever located at the bottom right of the dashboard and secure it. Locate the inspection cap (if present) on the headlight and remove it (located at the rear of the headlight). At this point, you will find the bulbs with metal clips; pull the bulb holders out of the headlight and extract the damaged bulb using a screwdriver and pliers. Fit the new bulb (ensuring it is the correct type and size), insert the bulb holder back into the headlight housing, and close the headlight with the inspection cap. Test the lights to ensure they are functioning correctly.

Watch the video!


by ScegliAuto

More videos