Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Instructions for Removing the Rear Door Handle

Model: BMW Serie 7 E68, MK 4, E65, E67, E66 - Years: 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008
Part: Handle

See other generations:
Video tutorial

If you need to remove the external handle of the rear door, it is important to clarify right away that it is not necessary to remove the door panel (in the video, the panel was removed to show how the fastening mechanism works). That said, open the door and locate the plastic cap right behind the lock, near the handle.

Once you remove the cap and the corresponding gasket, use a hook screwdriver to grasp and extract the fastening tab of the handle, which can then be removed from its seat after disengaging the retaining clip of the control cable.


Updated on 19 February 2026 by ScegliAuto


Related tutorials

Front Door Handle Removal Instructions
Front Door Handle Removal Instructions
BMW Serie 7 (1994-2001 / E38, MK 3) To remove the outer door handle, you first need to take off the panel. After removing the mounting screws, disengage the snap fasteners along the edg…
Instructions for Door Panel Removal
Instructions for Door Panel Removal
BMW Serie 7 (2001-2008 / E68, MK 4, E65, E67, E66) Removing the door panel is fairly simple. Start by locating the screws that secure it. Remove the caps along the armrest, the one inside the handle o…
Instructions for Removing Air Vents
Instructions for Removing Air Vents
BMW Serie 7 (1994-2001 / E38, MK 3) To remove the air vents in the center of the console, start with the one located above, in the center of the dashboard: this way, you can access the …

How to Reset the AdBlue Warning Light on a Peugeot Boxer

To reset the AdBlue system on a 2018 Peugeot Boxer, follow these steps: Start the engine and ensure the vehicle is parked in a well-ventilated area. Locate the "MENU" button on the dashboard or steering wheel controls. Press and hold the "MENU" button until the menu options appear on the display. Use the arrow buttons or scroll wheel to access the "Vehicle Settings" or "Settings" menu. Select the "AdBlue" or "AdBlue System" option. Look for the "Recharge" or "Reset" option in the AdBlue menu. Once you find the reset option, select it and confirm your choice when prompted. The system will be reset, and a confirmation message may appear on the display. Turn off the engine and wait a few seconds. Restart the engine and check that the AdBlue system has been reset.

Watch the video!


by ScegliAuto

More videos