Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to remove the roof handle of the BMW 7 Series

Model: BMW Serie 7 MK 3, E38 - Years 1994-2001
Part: Handle

Today's guide will show us the steps to disassemble and replace the roof grab handle of the BMW 7 Series. First, we get into the car and start by unhooking the two inner plastic clips of the handle, located on both sides; then we unscrew the fixing screws we find inside, using a Phillips screwdriver, as shown in the video. At this point, we remove and replace the grab handle with the new one, as well as with the original one; we reassemble and properly secure the handle with the screws, applying the reverse process!

Posted on 2 August 2025 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Sunroof Seal on BMW 7 Series
Replacing the Sunroof Seal on BMW 7 Series
BMW Serie 7 (2001-2008 / E66, E67, E68, E65, MK 4) In this guide, you will learn how to remove and replace the sunroof seal on a BMW 7 Series, a procedure that can be applied to any vehicle model. Fir…
How to Replace the Door Panel Handle on BMW 7 Series
How to Replace the Door Panel Handle on BMW 7 Series
BMW Serie 7 (2001-2008 / E66, E67, E68, E65, MK 4) How to remove and replace the door handle on a BMW 7 Series? Use a pry tool to remove the plastic covers under the handle, then use a screwdriver to …
How to remove the rear door handle in the BMW 7 Series?
How to remove the rear door handle in the BMW 7 Series?
BMW Serie 7 (2022-2026 / G70) In this tutorial we can see how to disassemble the rear door handle in the BMW 7 Series, a very simple and quick operation. First of all, we open the…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos