Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

To reset the service indicator of the BMW X2 F39.

Model: BMW X2 MK 1, F39 - Years 2018-2023
Part: Service warning light

If the service light on your BMW X2 F39 instrument panel (2018-2023 model year) remains fixed, despite having recently completed the necessary vehicle maintenance, you must follow the following steps to manually reset it in a few seconds. First, turn on the instrument panel and hold down the button located in the lower left corner. As soon as the new menu screen appears, release the button and press it several times until you see the option for car maintenance. Finally, hold down the button until the service light reset is complete.

Posted on 31 August 2023 by ScegliAuto

Video tutorial

Related tutorials

How to reset the brake pads warning light in the BMW X2?
How to reset the brake pads warning light in the BMW X2?
BMW X2 (2018-2023 / MK 1, F39) In this tutorial we can see how to reset the brake pads warning light in the BMW X2, an extremely simple and fast operation, to be carried out only a…
How to fold the rear seats of a BMW X2
How to fold the rear seats of a BMW X2
BMW X2 (2018-2023 / MK 1, F39) Before we are able to begin, we will have to open the rear doors of our BMW X2. Let's start by pulling the three hooks positioned at the lower corner…
Where is the battery located in the BMW X2?
Where is the battery located in the BMW X2?
BMW X2 (2018-2023 / MK 1, F39) In order to replace the battery of the BMW X2, you need to open the hood so that you can access the components inside the engine compartment: to reac…

Removing the Front Arm Bushing of a Hyundai Getz

Let's look at removing the front arm bushing of a Hyundai Getz. First, place the car on a column lift and loosen the wheel nuts with a telescopic spanner, then remove the wheel. Use a socket spanner to unscrew the lower securing bolt of the arm and the bolt mounted under the wheel hub, then unscrew the bolts on the upper part of the arm (as shown in the video). Remove the bushing from the bolt housing. Always compare the parts to be replaced with the new ones; if they are suitable, you can install them. Start the installation of the new part: fit the new bushing and tighten all bolts to the specified torque. Double-check the correct tightening of the parts. Refit the wheel to complete the job.

Watch the video!


by ScegliAuto

More videos