Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Window Motor Switch

Model: BMW Serie 5 E60, E61 - Years 2003-2010
Part: Push button

Almost all cars come equipped with power windows that can be raised or lowered by pressing a specific button. If the device malfunctions, it is important to know how to fix it. The following guide shows how to repair the window motor. First, remove the door panel, which allows access to the mechanism and its electrical and mechanical connections. Once done, first disconnect the electrical wires. Then, remove the screws that hold the support brackets in place. Once visible and free from electronic connections, you can remove the motor.

Updated on 20 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Check Rear Window Regulator Malfunction
Check Rear Window Regulator Malfunction
BMW Serie 5 (1995-2003 / E39) To check the malfunction of the rear door window regulator, first remove the door panel. Once the soundproofing cover is removed, you can inspect the…
How to disassemble the power window mechanism of the BMW 5 Series.
How to disassemble the power window mechanism of the BMW 5 Series.
BMW Serie 5 (1995-2003 / E39) In this short and simple guide, we will see the procedure that will allow us to disassemble and replace the window regulator mechanism of the BMW 5 S…
Guide to replacing the side glass of the BMW 5 Series
Guide to replacing the side glass of the BMW 5 Series
BMW Serie 5 (1995-2003 / E39) In this guide, we will see the necessary information to disassemble and replace the side glass and window regulator mechanism of the BMW 5 Series. Fi…

How to Replace the Starter Motor of the Opel Vivaro

To reach the starter motor in this model, you will need to remove several components that conceal it. It is located behind the radiator and slightly lower on the engine. Make space from underneath your vehicle to disconnect the plugs and all the bolts securing it in place. After extracting it, install all necessary components and reverse the steps for reassembling the components that covered the starter.

Watch the video!


by ScegliAuto

More videos