Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Where is the cabin fuse box of the BMW 1 Series E87?

Model: BMW Serie 1 E81, E82, MK 1, E87 - Years 2004-2013
Part: Fuse box

This YouTuber shows where the fuses are located in the cabin fuse box of a BMW 1 Series model E87. This model was produced and sold between 2004 and 2013. The fuse box is located at the back of the glove compartment, on the passenger side. To replace or inspect one of the fuses, you need to flip down the glove compartment and use pliers, as the fuses are difficult to remove by hand. In the same compartment, there is also a diagram showing the use of each fuse.

Updated on 22 August 2026 by ScegliAuto

Video tutorial

Related tutorials

Fuse Diagram for BMW 1 Series E87
Fuse Diagram for BMW 1 Series E87
BMW Serie 1 (2004-2013 / E81, E82, MK 1, E87) This video contains the fuse diagram for the BMW 1 Series E87 from the fuse box located inside the cabin. You should consult the owner's manual for y…
Where is the Cabin Fuse Box of the BMW 1 Series E87?
Where is the Cabin Fuse Box of the BMW 1 Series E87?
BMW Serie 1 (2004-2013 / E81, E82, MK 1, E87) If you are looking for the cabin fuse box of your BMW 1 Series E87, read this guide and follow the simple procedure described. First, get into the ca…
Where Are the Fuses in the BMW 1 Series E87?
Where Are the Fuses in the BMW 1 Series E87?
BMW Serie 1 (2004-2013 / E81, E82, MK 1, E87) The fuses of the BMW 1 Series E87 are all contained within the dedicated fuse box located inside the vehicle: in this model, the box is positioned wi…

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos