Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Top Up the Coolant in the BMW 320

Model: BMW Serie 3 E91, E90, E92 - Years 2005-2013
Part: Antifreeze coolant

To top up the coolant in the BMW 320, start by opening the hood, releasing it from the internal lever. Once the hood is open, locate the coolant reservoir, remove the cap from the reservoir, and note that the indicator pops up to check the level. Pour the new coolant until it reaches the "max" mark. Once the "max" mark is reached, take the cap of the coolant reservoir, insert the indicator into the cap hole, and close it. After securing the reservoir cap, you can close the hood, and the coolant has been topped up.

Updated on 26 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Top Off the Coolant in a BMW 3 Series
How to Top Off the Coolant in a BMW 3 Series
BMW Serie 3 (2005-2013 / E91, E90, E92) Want to check and top off the coolant reservoir? Here's how to add coolant to your BMW 3 Series. Pull the plastic lever located at the bottom left of…
How to check the coolant level of the BMW 3 Series
How to check the coolant level of the BMW 3 Series
BMW Serie 3 (2012-2019 / F30, F31) Today's instructions will show us how to check the coolant level of the BMW 3 Series. First, we open the hood of the car and locate the coolant reser…
How to Check the Coolant Level in a BMW 3 Series
How to Check the Coolant Level in a BMW 3 Series
BMW Serie 3 (2005-2013 / E91, E90, E92) In today's tutorial video, you will learn how to check the coolant or antifreeze level in a BMW 3 Series, and how to top it off if necessary. First, …

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos