Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Engine Oil Replacement on BMW 320

Model: BMW Serie 3 F30, F31 - Years 2012-2019
Part: Engine oil

Let's see how to replace the oil and filter on a BMW 320? Lift the vehicle with a jack. Remove the protective panel under the chassis, then use a socket wrench to unscrew the oil pan bolt (after removing the plastic protective panel). Drain the fluid into a disposal container and reinstall the oil pan bolt (unscrew the filter located next to it with a socket wrench). After draining, lower the vehicle and lift the hood. Unscrew the filter from the engine compartment and replace it with a new one of the same type.

Updated on 4 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Top Up the Coolant in the BMW 320
How to Top Up the Coolant in the BMW 320
BMW Serie 3 (2005-2013 / E91, E90, E92) To top up the coolant in the BMW 320, start by opening the hood, releasing it from the internal lever. Once the hood is open, locate the coolant rese…
How to Change Oil on BMW 320 Series
How to Change Oil on BMW 320 Series
BMW Serie 3 (2005-2013 / E91, E90, E92) Replace the engine oil and filter on a BMW 3 Series. This is a simple operation by following the right steps. Lift the car on a column lift, remove t…
How to Access the Fuse Box in a BMW 320
How to Access the Fuse Box in a BMW 320
BMW Serie 3 (2005-2013 / E91, E90, E92) This video shows how to access the fuse box in a BMW 3 Series 320. The procedure is common to BMW models E90, E91, E92, and E93. Ensure the vehicle i…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos