Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. BMW
    3. :
  3. X5
    4. : How to disassemble the front headlight on the BMW X5?

BMW X5 - Video tutorial

Model: BMW X5 E53 - Years 1999-2006
Part: Headlight
Operation: How to disassemble the front headlight on the BMW X5?

In this tutorial, we can see how to disassemble the front headlight in the BMW X5, a very simple and fast operation. First of all, make sure that the key is not inserted, then open the engine hood and unscrew the two upper bolts of the headlight in question with a 10mm socket wrench. Proceed by unscrewing the lower bolts with an 8mm key, separate the inner front cover of the fender and remove the additional indicated bolts, in order to detach the bumper corner. At this point, we can pull the headlight outward, separate it from the frame, and disconnect the power connector.


Posted on 28 November 2023 by ScegliAuto



Removing the headlight bulbs on BMW X5
BMW X5 (2007-2013 / E70) Do we want to remove the headlight bulbs? Let's see the disassembly of the front headlight of a BMW X5. Lift the front hood, find the headlight inspe
Disassembly of the front headlight of the BMW X5
BMW X5 (1999-2006 / E53) Today's guide will show us how to dismantle and replace the front headlight and bumper of the BMW X5, following the instructions below. First, we ope
Replacement of the headlight washer nozzle of the BMW X5
BMW X5 (1999-2006 / E53) In this video tutorial we will see how to disassemble and replace the headlight washer nozzle of the BMW X5, following the instructions below. In ord

Fiat Ducato 2.8 JTD gearbox oil replacement

Let's see in this guide the main steps to be able to change the transmission oil of the second series Fiat Ducato, with 2.8 JTD engine. First of all we lift the car and go to locate the gear oil vent bolt, which we find near the transmission; we use a hex wrench to unscrew it, letting it drain the old oil in a container for about ten minutes. At this point we open the bonnet and remove the air intake sleeve, so as to be able to access the gearbox oil filling hole; then we fill up to the maximum level!

Watch the video!


by ScegliAuto

More videos