Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. BMW
    3. :
  3. Serie 5
    4. : Replacement front xenon lamp

BMW Serie 5 - Video tutorial

Model: BMW Serie 5 E39 - Years 1995-2003
Part: Headlight bulb
Operation: Replacement front xenon lamp

Identify the defective lamp, remove the retaining spring of the lamp holder, the metal protection and remove it from the lamp. Remove the spring and bulb from the headlight. Open the package of the new lamp by removing the packaging and absolutely without touching the glass bulb with your hands put the lamp in the headlight paying attention to the reference notches, the lamp must be mounted precisely and in the right direction. Close the retaining spring and slide the lamp holder onto the lamp connector. Put the metal protection back on, close it and check for correct operation.


Posted on 24 June 2023 by ScegliAuto



Guide to installing a xenon kit
BMW Serie 5 (1995-2003 / E39) The guide shows how to install a xenon kit without doing damage. Make sure that the lamps do not break or scratch during installation. The bulbs must
Fitting a xenon headlight
BMW Serie 5 (1995-2003 / E39) The operation of assembling the xenon headlights is a relatively simple and fast job, even if it requires a certain amount of patience and dexterity
How to replace a xenon bulb
BMW Serie 5 (1995-2003 / E39) When a xenon bulb burns out, it must be changed quickly so as not to violate the highway code. Doing so is extremely simple. First you need to buy a

Fiat Ducato 2.8 JTD gearbox oil replacement

Let's see in this guide the main steps to be able to change the transmission oil of the second series Fiat Ducato, with 2.8 JTD engine. First of all we lift the car and go to locate the gear oil vent bolt, which we find near the transmission; we use a hex wrench to unscrew it, letting it drain the old oil in a container for about ten minutes. At this point we open the bonnet and remove the air intake sleeve, so as to be able to access the gearbox oil filling hole; then we fill up to the maximum level!

Watch the video!


by ScegliAuto

More videos