Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. BMW
    3. :
  3. Serie 5
    4. : Fitting a xenon headlight

BMW Serie 5 - Video tutorial

Model: BMW Serie 5 E39 - Years 1995-2003
Part: Headlight
Operation: Fitting a xenon headlight

The operation of assembling the xenon headlights is a relatively simple and fast job, even if it requires a certain amount of patience and dexterity - To start you have to disassemble the headlight cover, disassemble the headlight you want to change, remove it from its seat and disconnect the electrical connectors of the lamps, remove the low beams and disconnect the two-wire lamp. Only later will it be possible to release the two metal clips that secure the lamp in its position in order to be able to extract it. The procedure for inserting the xenon headlight is interlocking. Once the new headlight is in place, simply hook the connectors.


Posted on 22 July 2023 by ScegliAuto



Guide to installing a xenon kit
BMW Serie 5 (1995-2003 / E39) The guide shows how to install a xenon kit without doing damage. Make sure that the lamps do not break or scratch during installation. The bulbs must
How to replace a xenon bulb
BMW Serie 5 (1995-2003 / E39) When a xenon bulb burns out, it must be changed quickly so as not to violate the highway code. Doing so is extremely simple. First you need to buy a
After market xenon kit installation
BMW Serie 5 (1995-2003 / E39) It is possible to replace the original halogen bulbs with xenon ones which, however, require a special control unit for ignition. The installation wi

    Frequently Asked Questions

    • Serie 5 2017-2024 - Bmw 5 series low beam headlight price Read Answer

Disassembly of the gear knob on the Lancia Ypsilon 2

Today we will see, in this video tutorial, how to remove and replace the gear knob on the second series Lancia Ypsilon, but also on the Lancia Musa, in simple and quick steps. We get inside the car and start by removing the old gear knob; to do this, just unscrew it anticlockwise, as shown in the video. At this point we also remove the gearshift gaiter, in order to replace, if necessary, it too; we just have to fix the new headset and insert the new gear knob, screwing it correctly and without creating play on the gear lever!

Watch the video!


by ScegliAuto

More videos