Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on a BMW 2 Series

Model: BMW Serie 2 F45 - Years: 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021
Part: Service warning light

See other generations:
Video tutorial

The service light on the BMW 2 Series resets after the vehicle has undergone a service at the shop. To reset the light, turn on the ignition and connect the diagnostic computer to the vehicle's OBD port.

Next, select "Specific Functions", "Maintenance", and "Service". Wait a few seconds and select F1, then wait for it to load and select F4. To complete the reset of the light, select F8. Once finished, turn off the ignition, disconnect the OBD connector, and restart the vehicle to verify that the reset was successful.


Updated on 10 September 2026 by ScegliAuto


Related tutorials

How to Reset the Oil Light on the BMW 2 Series F44
How to Reset the Oil Light on the BMW 2 Series F44
BMW Serie 2 (2019-2026 / F44) If you have just changed the engine oil in your BMW 2 Series F44, but the warning light continues to appear on the dashboard, you need to manually re…
How to reset the TPMS light on the BMW 2 Series
How to reset the TPMS light on the BMW 2 Series
BMW Serie 2 (2013-2021 / F22) Let's see the process on how to reset the tire pressure warning light of the BMW 2 Series; before resetting the TPMS sensors, it is necessary that al…
How to Reset the Service Light on a BMW 2 Series?
How to Reset the Service Light on a BMW 2 Series?
BMW Serie 2 (2014-2021 / F45) .. In this video, you can see how to reset the service light on a BMW 2 Series 220d, a task to perform only after completing the scheduled.. …

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos