Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the TPMS light on the BMW 2 Series

Model: BMW Serie 2 F22 - Years 2013-2021
Part:

Let's see the process on how to reset the tire pressure warning light of the BMW 2 Series; before resetting the TPMS sensors, it is necessary that all four tires are at the correct pressure. First, we get into the cabin and start the instrument panel; then we go to the car settings, using the command on the central console, until we reach the vehicle status, as shown in the video. At this point, we go to the tire section and confirm the "perform reset", resetting the TPMS warning light from the instrument panel!

Posted on 16 August 2025 by ScegliAuto

Video tutorial

Related tutorials

How to reset the service in the BMW 2 Series?
How to reset the service in the BMW 2 Series?
BMW Serie 2 (2013-2021 / F22) In this tutorial, we can see how to reset the service in the BMW 2 Series, an extremely simple and quick operation to be carried out only after compl…
How to reset the service in the BMW 2 Series?
How to reset the service in the BMW 2 Series?
BMW Serie 2 (2014-2021 / F45) In this tutorial, we can see how to reset the service in the BMW 2 Series, an extremely simple and quick operation to be performed only once all sche…
How to reset the tire pressure sensor of a BMW 2 Series?
How to reset the tire pressure sensor of a BMW 2 Series?
BMW Serie 2 (2019-2026 / F44) To reset the tire pressure warning light on a BMW 2 Series, turn on the instrument panel without starting the engine and interact with the central to…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos