Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to disassemble the radiator sleeve of a BMW 3 Series?

Model: BMW Serie 3 F31, F30 - Years 2012-2019
Part: Radiator

Good morning, today we are here to disassemble the radiator hose of our BMW 3 Series. We start by opening the front engine hood. Then, we will need to proceed by locating the hose, which is the tubing that connects the radiator to the engine. We carefully observe the hose to locate the clamps. Using a pair of pliers, we slide the clamps towards the center of the hose to unlock them. Now, with great care, we pull the hose outwards to detach it from the radiator. We must be careful not to damage the hose or the radiator during this operation. Once removed, the hose can be replaced or examined for any damage.

Posted on 31 March 2024 by ScegliAuto

Video tutorial

Related tutorials

Replacement of the front coolant pipe of the BMW 3 Series 328i.
Replacement of the front coolant pipe of the BMW 3 Series 328i.
BMW Serie 3 (2005-2013 / E91, E90, E92) In a few simple steps, we will see how to disassemble and replace the front coolant tube of the BMW 3 Series 328i engine. First, open the hood of the…
How to know the fuse diagram of a BMW 3 Series
How to know the fuse diagram of a BMW 3 Series
BMW Serie 3 (2012-2019 / F31, F30) The fuse box of a BMW 3 Series car can be located inside the vehicle's cabin and contains fuses related to: windshield wiper motor, windshield washer…
How to replace the lower radiator hose on the BMW 3 Series E46
How to replace the lower radiator hose on the BMW 3 Series E46
BMW Serie 3 (1998-2006 / E46) In this video tutorial we will see how to remove and replace the lower radiator or coolant hose on the BMW 3 Series E46 (325 Xi). First we open the e…

Other guides you may be interested in

How to Install Seat Covers on an Audi Q7

Are you planning to install seat covers on your Audi? Let's see this video that explains how to do it. First, move the seat forward and raise the seat cushion. Next, remove the headrest from the backrest. Slide the seat cover from the top down over the backrest. If necessary, remove the controls on the side of the seat by pulling them towards you. After sliding on the upper seat cover, adjust it around the headrest seals with your hands. Install the lower seat cover on the seat cushion. Use plastic trim tools to assist with the installation.

Watch the video!


by ScegliAuto

More videos