Do it yourself
Frequently asked questions about cars and motorcycles

How do you replace the fuse box of the BMW 3 Series?

Model: BMW Serie 3 E91, E90, E92 - Years 2005-2013
Part: Fuse box

In order to replace the fuse box of the BMW 3 Series, you need to open the glove compartment located on the front passenger side: this way you will be able to proceed by loosening the internal screws that hold it in place. Once this compartment has been removed from its seat, you will be able to access the box at the back: this can be removed from its seat by disconnecting the connectors inside. Then you can connect the new box to them: the new box can now be fixed in place, reassembling the compartment as well.

Posted on 15 April 2024 by ScegliAuto

Video tutorial

Related tutorials

BMW Serie 3 (2005-2013 / E91, E90, E92) The fuses in the BMW 3 Series are located inside the dedicated fuse box installed within the vehicle. In this car model, the fuse box is situated ins…
BMW Serie 3 (1998-2006 / E46) On the BMW 3 Series, the fuses are located inside the fuse box installed in the vehicle: in this particular model, there is a single fuse box. This b…
BMW Serie 3 (2005-2013 / E91, E90, E92) The fuses of the BMW 3 Series are located inside two fuse boxes installed in the vehicle: the first is situated inside the cabin, immediately behind …

Other guides you may be interested in

    Frequently Asked Questions

    • Serie 3 2005-2013 - What is the cigarette lighter fuse of the BME 3 Series 318d e90? Read answer
    • Serie 3 1998-2006 - Where is the airbag fuse located on BMW 3 Series E46? Read answer

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos