Do it yourself
Frequently asked questions about cars and motorcycles

Where are the fuses located in the BMW 3 Series?

Model: BMW Serie 3 F30, F31 - Years 2012-2019
Part: Fuse box

The fuses in the BMW 3 Series are located inside the designated fuse boxes within the vehicle. For the BMW 3 Series, open the trunk and lift the carpet that serves as flooring in the trunk. Underneath, next to the battery, you will find the fuse box, which contains fuses for the heated seats, cabin fan, windshield wipers, and more. The second fuse box is located in the engine compartment, under a cover positioned directly beneath the windshield: it contains fuses for the Start&Stop system, courtesy lights, and more.

Updated on 7 June 2026 by ScegliAuto

Video tutorial

Related tutorials

BMW Serie 3 (1998-2006 / E46) All the fuses for the BMW 3 Series E46 are located inside the single fuse box installed in the vehicle. This is found inside the cabin, on the inner …
BMW Serie 3 (2005-2013 / E91, E90, E92) The fuses in the BMW 3 Series are located inside the dedicated fuse box installed within the vehicle. In this car model, the fuse box is situated ins…
BMW Serie 3 (2005-2013 / E91, E90, E92) The fuses of the BMW 3 Series are located inside two fuse boxes installed in the vehicle: the first is situated inside the cabin, immediately behind …

Other guides you may be interested in

    Frequently Asked Questions

    • Serie 3 2005-2013 - What is the cigarette lighter fuse of the BME 3 Series 318d e90? Read answer
    • Serie 3 1998-2006 - Where is the airbag fuse located on BMW 3 Series E46? Read answer

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos