Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to disassemble the rear wheel of the BMW 3 Series

Model: BMW Serie 3 F30, F31 - Years 2012-2019
Part: Checks and maintenance

In this guide, we will see the instructions that will allow us to disassemble and replace the rear wheel of the BMW 3 Series. First of all, we lift the rear wheel to be replaced from the ground, using the appropriate jack provided; then we loosen the nuts of the rear wheel, in order to remove it, as shown in the video. At this point, we replace the wheel with the spare one or with the emergency wheel (or in any case with the wheel provided); we secure the wheel by tightening all the bolts in a crisscross manner, finally placing the entire kit in the trunk!

Posted on 23 April 2024 by ScegliAuto

Video tutorial

Related tutorials

Replacement of the rear wheel bearing of the BMW 3 Series
Replacement of the rear wheel bearing of the BMW 3 Series
BMW Serie 3 (1998-2006 / E46) Today's main steps will show us how to disassemble and replace the rear wheel bearing of the BMW 3 Series. First, we lift the car and start disassemb…
How to Fix the Handbrake on a BMW 3 Series
How to Fix the Handbrake on a BMW 3 Series
BMW Serie 3 (2012-2019 / F30, F31) To fix the handbrake on a BMW 3 Series (if it does not stop even when pulled all the way), start by putting the car on a lift and raising it, or on a…
Where is the spare tire located on the BMW 3 Series?
Where is the spare tire located on the BMW 3 Series?
BMW Serie 3 (2019-2026 / G20) On the BMW 3 Series, the spare tire is located inside the trunk. To find it, open the rear trunk lid and look for the tire at the top of the cargo ar…

    Frequently Asked Questions

    • Serie 3 2012-2019 - How much does a service cost for the BMW 3 Series? Read answer
    • Serie 3 2005-2013 - Why is the on-board computer of the BMW 3 Series slow to start up? Read answer

How to Reset the Central Locking of the Volkswagen Golf 4?

If the central locking system of the Volkswagen Golf 4 is not working, it is likely necessary to reset the system: to do this, open the driver's door and detach the side panel of the dashboard next to the steering wheel. Under this panel, you will find the fuses, including the one for the central locking, which is indicated in the manual as number 14. To reset the system, remove this fuse from its housing, then reinsert it or replace it with a new one of the same amperage: this will reset the central locking system.

Watch the video!


by ScegliAuto

More videos