Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Handbrake Actuator on the BMW X5

Model: BMW X5 E70 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Parking brake

See other generations:
Video tutorial

To replace the handbrake actuator on the BMW X5, open the rear hatch and then detach the panel on the left side of the trunk: once this panel is removed, you will be able to locate the handbrake module underneath, which must be removed from its housing by loosening the screws of its supports and disconnecting the connectors.

At this point, insert the new module into its housing, securing it and connecting it properly to ensure everything functions correctly again.


Updated on 27 September 2026 by ScegliAuto


Related tutorials

BMW X5 (2007-2013 / E70) To reset the parking brake on a BMW X5, connect a diagnostic tool to the vehicle's OBD port: on this model, the port is located on the lower left sid…
BMW X5 (2007-2013 / E70) To replace the handbrake button on a BMW X5, use a tool to pry off the trim that surrounds the center console. Once removed, proceed to loosen the sc…
BMW X5 (2007-2013 / E70) To reset the electronic parking brake on the BMW X5, open the rear trunk. Next, lift the carpet at the base of the trunk: this will allow you to acce…

How to Activate the Disabled TRC on the Toyota Yaris?

As the video clearly shows, disabling or activating the traction control (TRC or ESP) on the Toyota Yaris is very simple. By default, the traction system activates every time the vehicle is started. To disable it, simply press the button depicting a skidding car located in the centre of the vehicle where the controls are, such as the hazard lights and the radio, but near the handbrake. Once disabled, the TRC off light will illuminate on the dashboard. To reactivate it, just press the same button again.

Watch the video!


by ScegliAuto

More videos