Do it yourself
Frequently asked questions about cars and motorcycles

How to replace the door handle on a BMW?

Model: BMW BMW Various
Part: Handle

In this tutorial we can see how to replace the door handle on a BMW, an extremely simple and quick operation. First of all, we open the door we will be working on, then we locate the small rubber plug along the inner edge, at the same height as the handle, and remove it. We then loosen the bolt accessible from the hole using a Torx T25 key, being careful not to drop it, extract the lock cylinder and separate the handle from the door. At this point, we can disconnect the connector and install the replacement.

Posted on 7 May 2024 by ScegliAuto

Video tutorial

Related tutorials

BMW BMW Various In this video we see how to initialize an old type BMW key, that is one of those that do not have the square remote control. We must make sure that a…
BMW BMW Various The BMW M57 diesel engine was produced from 1998 to 2013 and is considered very reliable and durable. It is not equipped with a timing belt, but rath…
BMW BMW Various Let's discover the process and instructions on how to disassemble and replace the external rearview mirror of the BMW IX3, following the instructions…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos