Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the rear headlight bulbs in the BMW X1?

Model: BMW X1 F48 - Years 2015-2022
Part: Tail light bulb

In this tutorial we can see how to replace the rear light bulbs in the BMW X1, an extremely simple and quick operation. First of all, make sure that the key is not inserted, then open the trunk door, remove the plastic cover on the inner edge of the headlight in question, and, using a 10mm socket wrench, unscrew the two bolts just removed. Then grab the headlight, pull it towards you and separate it from the bodywork. At this point, all that remains is to disconnect the connector, open the inner cap, and replace the faulty bulb.

Posted on 12 May 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Rear Headlight Bulbs on the BMW X1
How to Replace the Rear Headlight Bulbs on the BMW X1
BMW X1 (2015-2022 / F48) Below are the instructions to remove and replace the rear headlight bulbs on the BMW X1. First, open the trunk hatch and start unscrewing the screws …
Replacing Front Headlight Bulb on BMW X1
Replacing Front Headlight Bulb on BMW X1
BMW X1 (2009-2015 / E84) Replace the damaged bulbs mounted in the front headlight on a BMW X1. Open the hood by pulling the hood release lever and secure it. Remove the headl…
How to Replace the Rear Headlight Bulb on a BMW X1
How to Replace the Rear Headlight Bulb on a BMW X1
BMW X1 (2015-2022 / F48) Today, you will learn the steps to remove and replace the rear headlight bulbs on a BMW X1. First, open the trunk and start removing the plastic cove…

Other guides you may be interested in

How to Open the Bonnet of a Renault Megane if the Lever is Broken?

If the lever that unlocks the bonnet of the Renault Megane is broken or not functioning, there is an emergency procedure to unlock the mechanism: remove the right front grille located at the top of the bumper. Once the grille is removed, you can locate the actuator mechanism: by pulling the spring in this position, you can unlock the actuator, allowing you to lift the bonnet and access the components located inside the engine compartment. You can then close the bonnet simply by lowering it.

Watch the video!


by ScegliAuto

More videos