Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you open the hood of the BMW X1?

Model: BMW X1 F48 - Years: 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022
Part: Body

See other generations:
Video tutorial

The opening of the front hood of the BMW X1 is practically no different from other cars, in fact the method is absolutely standard. If we want to check the fluid levels of the car or top them up, we simply have to pull the lever in the interior, specifically next to the driver's door, at the bottom, thus releasing the latch on the front part of the aforementioned hood.

At this point, we go outside and all we have to do is lift the hood, and thanks to the hydraulic pistons installed on it, it will remain open.


Posted on 16 April 2025 by ScegliAuto


Related tutorials

How to Open the Fuel Door on a BMW X1
BMW X1 (2015-2022 / F48) This guide shows you how to open the fuel door on a BMW X1 by following these simple and quick steps. First, take your remote and unlock the vehicle …
How to open the trunk hatch from the inside of the BMW X1.
How to open the trunk hatch from the inside of the BMW X1.
BMW X1 (2015-2022 / F48) The instructions in this guide will show us how to open the rear trunk lid from inside the BMW X1. To manually open the trunk lid, simply press the d…
How to Replace the Battery in a BMW X1?
How to Replace the Battery in a BMW X1?
BMW X1 (2015-2022 / F48) To replace the battery in a BMW X1, open the hood to access the components inside the engine compartment. Locate the battery in the upper right side.…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos